koralLED 70W
INSTRUKCJE, FILMY, CZĘŚCI ZAMIENNE, PYTANIA
- No videos found.
No products found.
Q1: I installed a new device and connected the power cable, but the light does not work.
Ans: koralDose will only function properly when connected to the koralCore app.
Q2: According to the schedule set in the koralCore App, the LED should be working, but it is not lit.
Ans: Follow these steps to diagnose:
- Check whether the koralDose power supply is properly connected, secure, and not damaged.
- Ensure the Bluetooth connection is working. If not, reset the Bluetooth connection.
- Verify that the schedule is correctly set.
- If the above steps fail, uninstall and reinstall the app, and reset the device using the “Clear Settings” option.
Q3: The pump head does not run at the scheduled time on my koralDose.
Ans: Check if the delay function is enabled, as this may cause the pump heads to operate with delays.
Q4: Can I manually control koralDose without using the koralCore App?
Ans: koralDose is designed as a smart device that primarily relies on app control, but basic manual control options are available for emergencies.
Q5: Can koralDose support different dosing modes?
Ans: Yes, the koralCore App supports fixed dosing, interval dosing, and dynamic adjustment based on environmental conditions.
Q6: The pump heads of koralDose have slightly different speeds under the same speed setting.
Ans: This is normal, as motor speeds are within the tolerance range. Calibration can be performed to ensure dosing accuracy.
Q7: The power indicator of koralDose flashes abnormally.
Ans: This may be caused by an unstable power supply or device failure. Check the power supply connection. If the issue persists, reset and reconfigure the device.
Q8: Can koralDose be used outdoors?
Ans: koralDose is designed for indoor use and is not waterproof. If used outdoors, ensure it is protected from moisture and water.
Q9: Is there a limit to the Bluetooth pairing range of the koralCore App?
Ans: The normal operating range for Bluetooth is about 10 meters, depending on the environment.
Q10: Why does my koralDose make abnormal noise during operation?
Ans: Noise may be caused by foreign objects in the pump head, clogged pipes, or worn-out pump heads. Check and clean the components or replace them as necessary.
Q11: Does the pump head of koralDose have a lifespan limit?
Ans: Pump heads have a long lifespan under normal use, but frequent operation may shorten their lifespan. Regular checks and replacements are recommended.
Q12: Why is no liquid dispensed at the scheduled time I set?
Ans: Check if air bubbles are blocking the flow, ensure the schedule is enabled, and verify if the schedule is paused or skipped.
Q13: I encountered issues installing the koralCore App, or the program crashed.
Ans: Refer to the troubleshooting steps in Q2 to resolve the installation issues.
Q14: Why can’t I restore previous settings in the koralCore App on a new device?
Ans: koralCore App does not automatically sync settings to new devices. You need to manually set up the device or use the backup function to import settings.
Q15: Does the koralCore App support remote control?
Ans: Currently, it only supports control within the Bluetooth range and does not support remote control via the internet.
Q16: How can I calibrate the dosing volume of koralDose?
Ans: Use the “Calibration” function in the app, prepare a measuring cylinder, and follow the on-screen instructions to ensure accuracy.
Q17: What types of liquids can I use with koralDose?
Ans: koralDose is suitable for common aquarium liquids such as calcium, magnesium, and carbonate supplements. Avoid using overly viscous or granular liquids.
Q18: How often does koralDose require maintenance?
Ans: It is recommended to check the pump head and pipes twice a month to ensure there are no blockages or wear. Replace components as needed based on usage.
Q19: How do I replace the pump tubing on koralDose?
Ans: Follow the instructions in the user manual to replace the tubing, ensure correct installation, and restart the device for calibration.
Q20: Is koralDose suitable for freshwater aquariums?
Ans: Yes, it is suitable for automatic dosing in freshwater environments, such as adding fertilizers or trace elements.
Q1: The koralLED does not work after plugging in the power.
Ans: koralLED will only function properly when connected to the koralCore app.
Q2: The koralCore App schedule shows the light should be on, but it is not lit.
Ans: Follow these steps to diagnose:
- Check if the power supply is properly connected and functioning.
- Ensure the Bluetooth connection is active. If not, reset the Bluetooth pairing.
- Verify if the light is set as a secondary light; secondary lights operate according to the primary light’s settings.
- Check if the schedule is correctly configured.
- If the above steps do not resolve the issue, reset the device or reinstall the app.
Q3: The primary and secondary lights cannot be turned on or off simultaneously.
Ans: Check if the sunrise or moonlight functions are enabled. These features may cause delays between lights.
Q4: Can koralLED be manually controlled without the app?
Ans: koralLED is designed as a smart device mainly operated via the app, but basic manual controls, such as pressing the switch, are available in emergencies.
5: Can multiple koralLED lights be controlled using the same app?
Ans: Yes, the koralCore App supports multi-light management, allowing you to set independent schedules or synchronize control for each light.
Q6: Can koralLED be configured with different modes via the app?
Ans: Yes, the koralCore App supports multiple modes, including sunrise and sunset simulations and custom spectrum settings.
7: The brightness displayed on koralCore App differs from the actual brightness.
Ans: The koralCore App displays estimated values, which may vary by a few percent from the actual brightness, especially during sunrise, sunset, or when brightness is below 20%.
Q8: One of the color channels is not working.
Ans: Check if the spectrum channel is correctly configured. Try restarting the device or resetting the settings. If the issue persists, contact customer support.
Q9: Why does my koralLED automatically shut off in high-temperature environments?
Ans: koralLED has a built-in overheat protection mechanism. When the temperature exceeds the safe range, the brightness will be reduced, or the device will shut off to protect itself. Place the light in a well-ventilated area.
Q10: The spectrum output of koralLED is uneven or flickers.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Q11: Can koralLED synchronize with other brands of lights?
Ans: koralLED uses proprietary technology and cannot synchronize with other brands. It is recommended to use lights from the same series for optimal results.
Q12: Can koralLED be used outdoors?
Ans: koralLED is designed for indoor use and is not waterproof. If used outdoors, ensure proper waterproofing measures are taken to protect the device from moisture or water exposure.
Q13: Why does the light get hotter in some modes compared to others?
Ans: High-intensity modes (such as blue light or full spectrum) consume more energy, generating more heat. Ensure adequate ventilation when using these modes.
Q14: Can I replace the power adapter for koralLED myself?
Ans: It is not recommended. Non-official power adapters may cause device failure or safety issues. Contact customer service to purchase certified accessories.
Q15: The koralCore App cannot be installed, or it crashes.
Ans: Check if your device’s operating system is compatible with the app. If the issue persists, try reinstalling the app or refer to the diagnostic steps in Q2.
Q16: Is there a range limit for the Bluetooth connection of koralCore App?
Ans: The normal operating range for Bluetooth is approximately 10 meters. However, this may vary depending on environmental factors, such as walls or obstacles.
Q17: Can koralCore App restore settings from a previous device?
Ans: The koralCore App does not support automatic syncing of settings to new devices. You must manually reconfigure or use the backup function to import settings.
Q18: Does koralCore App support remote control?
Ans: Currently, it only supports control within the Bluetooth range and does not allow remote control via the internet.
Q19: Can koralLED integrate with voice assistants?
Ans: Voice assistant integration, such as Google Assistant or Amazon Alexa, is not currently supported.
KoralLED 70W
koralDose 4H